Load Paper In The Paper Tray - Brother DCP-7020 Quick Setup Manual

Load Paper in the Paper
2
Tray
1
Pull the paper tray completely out of the
machine.
2
While pressing the paper guide release
lever, slide the adjusters to fit the paper
size. Check that the guides are firmly in the
slots.
For Legal size paper, press in the inside
latches and pull out the back of the paper
tray.
3
Fan the stack of paper well to avoid paper
jams and misfeeds.
4
Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
5
Put the paper tray firmly back in to the
machine and unfold the output tray support
flap before you use the machine.
For details on supported paper specifications,
see "About paper" in Chapter 1 of the User's
Guide.
Maximum paper mark
5