Solo Switch - LD LAX20D User Manual

CONTROL eLeMentS:
15
PAN/BAL CONTROL
PANORAMA and BALANCE control.
You can adjust the stereo image of the signal via this control. Keep
this control in center position and your signal will be positioned in
the middle of stage. Turn this control fully counter clockwise and the
signal will be present only on the left speaker and vice-versa.
16
MUTE/ALT 3-4 SWITCH
Each channel is equipped with the MUTE/ALT 3-4 switch. This switch
is used to route the channel signal to ALT 3-4 output instead of the
main mix.
17

SOLO SWITCH

When pressing this button, the SoLo signal will replace other signals
and reach to the CoNTRoL RooM/pHoNES. Usually use the SoLo
function to preview each channel signal before they are let into the
mix.
It is useful to set an instrument's input level and EQ, and you can
"solo" any channel that you want to. However, the SoLo switch never
affects any mix other than the pHoNES/CoNTRoL RooM mix.
18
FADER
This control will adjust the overall level of this channel and set the
amount of signal sent to the main output.