Table of Contents
Advertisement
Table of Contents
MAINTENANCE
Perform maintenance on the coil mover each time a MONTHLY INSPECTION is performed to ensure that the
product remains in satisfactory condition for as long as possible. The OSHA "General Industry" standard for "Powered
industrial trucks"
(29 CFR
utilized in conjunction with those procedures. ONLY trained, authorized personnel or contractors should inspect and
maintain this device.
NOTE: The end-user is responsible for selecting and training employees to inspect and maintain the coil
mover.
Step 1: Tag the unit "Out of Service."
Step 2: Remove dirt or other matter from all surfaces.
Step 3: Conduct a MONTHLY INSPECTION.
Step 4: Perform all adjustments and repairs necessary to restore the coil mover to satisfactory condition. DO NOT
modify the unit in any way.
NOTE: Adjustments are simple corrections such as tightening loose fasteners and removing dirt or other
debris from the surface. Repairs involve removing worn parts and installing manufacturer-approved
replacement parts. Modifications are changes that alter the coil mover from satisfactory condition, like bending
the structural members and removing parts. NEVER modify the device without express, written approval from
Vestil. Modifications might make the device unsafe to use and automatically void the LIMITED WARRANTY
on p. 9.
Step 5: Make a dated record of all repairs, adjustments and/or replacements.
LABELING DIAGRAM
Label content and location are subject to change so your product might not be labeled exactly as shown.
Compare the diagram below with the RECORD. If you have any questions about labeling, contact
SERVICE. Replace all labels that are damaged, missing, or not easily readable (e.g. faded). To order
replacement
labels,
http://www.vestilmfg.com/parts_info.htm. Alternatively, request replacement parts and/or service by calling
(260) 665-7586 and asking the operator to connect you to
B
C
A
Table of Contents
1910.178) provides recommended maintenance procedures. The following steps should be
contact
the
technical
A: Label 1001 (on top)
D
Copyright 2020 Vestil Manufacturing Corp.
Rev. 12/8/2020
service
and
TECHNICAL
SERVICE.
B: LABEL 1049
C: Label 1153
D: Label 821
CCM MANUAL
TECHNICAL
parts
department
Page 7 of 8
online
at
Advertisement
Table of Contents
