Toshiba Q9+ Installation & Operation Manual page 49

Adjustable speed drives
Table of Contents

Advertisement

System Configuration and Menu Options
Q9 Plus ASD Install/Op Manual
Accel/Decel Group — One of two Accel/Decel
profiles may be selected and run. Each of the
Accel/Decel profiles is comprised of three user
settings: Acceleration, Deceleration, and Pattern.
Expanded descriptions of these parameters may be
found in the section titled
Direct Access Parameter
Information on pg. 73
(see F009).
PID Control — This setting enables or disables the
PID feedback function.
Torque Limit Group — This group is used to select
preset positive torque limits to apply to the active
motor (of a multiple motor configuration). The
settings may be accessed at F440, F441, F442,
and F443, respectively.
VLP Technology Control — This setting enables
or disables the Virtual Linear Pump function.
https://www.toshiba.com/tic/
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dn-68249-003

Table of Contents