Section 1 – Installing NVMe Devices
Please make sure the NVMe devices are installed into the following PCIe slot
locations on the ThinkStation P620 motherboard seen below. The NVMe
drives may use the dedicated Gen 4 capable onboard M.2 slots see Figure 1
(1), or use up to two Quad M.2 PCIe adapters and one AIC single M.2 adapter
in any of the Gen 3 capable PCIe slots, see Figure 1 (2).
Figure 1
Note: Depending on the installation used, any of the designated PCIe slots
see Figure 1 (2) above may be used to configure NVMe drives except PCIe
Slot 3 which is reserved for the first GPU.
6
Need help?
Do you have a question about the ThinkStation P620 and is the answer not in the manual?