Rinnai RSEP1S25P Installation And Operation Manual page 23

Figure 10: HEATER INSTALLATION: WALL MOUNT BRACKET
1. Install the Wall Mount Bracket on the wall, using four bolts...(field supplied). See warning
note (page 16) - ensure strength and integrity of mechanical fastening to structure
2. Install the heater bracket on the heater using four nuts.
3. Install the heater bracket to the wall mount bracket, and remove the lifting chains from the
top of the heater.
NOTE: The heater should be installed with enough 'slack' on the wiring and a flexible gas
connector to allow the rotation of the heater up to the service position.
(See service position information Figure 4 page 18).
23
SE+ Series Infrared Gas Heater Installation and Operation Manual
Wall Mount Bracket
Heater Bracket