Installing The Ink Cartridges - Brother MFC-890 Quick Setup Manual

5

Installing the Ink Cartridges

Warning
If ink gets in your eyes irrigate them with water
immediately, and if irritation occurs consult a
doctor.
1
Make sure that the power is turned on.
The LCD shows;
CHECK CARTRIDGE
Open cover,then...
2
Open the scanner cover by pulling the
release lever towards you.
The print heads will move to the ink
replacement position.
Release lever
3
Push the four coloured ink cartridge covers
one at a time so they pop up.
PUSH
Scanner cover
PUSH PUSH PUSH
Ink cartridge covers
4
Remove the white shipping cover by pulling
it towards you.
White shipping cover
The bottom of the white shipping cover is
wet with ink that will cause stains, so wipe
it clean before you place it down.
Do not throw away the white shipping
cover. You will need it when you transport
the machine.
5
Take out black ink cartridge.
6
Carefully remove the sealing tape from the
bottom of the ink cartridge.
To prevent spilling ink and staining your
hands and clothing, peel the sealing tape
gently and slowly.
Do not touch the ink opening on the
cartridge or removed tape.
Opening
Continued
5