Brother MFC-8680DN Network User's Manual page 43

h
The machine will search for your network and display a list of available SSIDs. You should see the SSID
you wrote down earlier. If the machine finds more than one network use the a or b keys to choose your
network, then press OK. Go to step l.
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name.
Go to step i.
i
Choose <New SSID> using a or b.
Press OK. Go to step j.
72.WLAN
SSID
a <New SSID>
b
Select ab or OK
j
Enter a new SSID name. (To manually enter the text, see Entering Text on page 225.)
Press OK.
72.WLAN
SSID:
Enter & OK Key
k
Press a or b to choose Infrastructure.
Press OK. Go to step l.
If you chose Ad-hoc, go to step m.
72.WLAN
Mode Select
a Ad-hoc
b Infrastructure
Select ab or OK
l
Choose the Authentication method using a or b, and press OK.
72.WLAN
Auth. Select
Open System
a
b Shared Key
Select ab or OK
If you chose Open System, go to step m.
If you chose Shared Key, go to step n.
If you chose WPA/WPA2-PSK, go to step q.
If you chose LEAP, go to step r.
If you chose EAP-FAST/NONE, EAP-FAST/MSCHAP
1
Shown on the LCD as EAP-FAST/MSCHAPv2.
Configuring your machine for a wireless network (For MFC-8890DW)
1
or EAP-FAST/GTC, go to step q.
3
33