Connecting The Y/C (S-Video) Signal To The Monitor; Connecting Audio To The Monitor; Connecting Pc Audio; Connecting The Pc Signal To The Monitor - Bosch Uml-202 Instruction Manual

UML -202-90
6.4

Connecting the Y/C (S-Video) Signal to the Monitor

There is one (1) mini-DIN type connector for the S-Video (Y/C) input (see Figure 6.2 on page
17) on the rear side panel.
NOTE: Both Y and C inputs are terminated with 75 ohm.
Fig. 6.2 Y/C Connection Pinout
Reference
1
2
3
4
6.5

Connecting Audio to the Monitor

There are two (2) sets of mono audio connectors for audio input.
–
–
Reference
Video 1
Video 2
S-video
6.5.1

Connecting PC Audio

The rear bottom panel has PC stereo audio IN and audio OUT. Connect with 1/8 in. mini phono
plug jack to Audio IN.
6.6

Connecting the PC Signal to the Monitor

There are three ways to connect the PC signal to the monitor.
6.6.1

HDMI

The monitor can be connected to the HDMI (High Definition Multimedia Input) by connecting a
HDMI cable (not supplied).
Fig. 6.3 HDMI Input
Bosch Security Systems, Inc.
Input
GND
GND
Y-signal IN or OUT
C-signal IN or OUT
All audio inputs are active loop-through.
Audio 1 is associated with Video 1 or Y/C; Audio 2 is associated with Video 2.
Audio 1 Audio 2
X
X
X
Instruction Manual
Installing the UML -202-90 | en
F01U076723 | 1.0 | 2007.09
17