Subscribe to Our Youtube Channel
Related Manuals for Huck ALCOA 12142
Summary of Contents for Huck ALCOA 12142
- Page 1 12142 ydraulIc nstallatIon Makers of Huck , Marson , Recoil ® ® ® Brand Fasteners, Tools & Accessories August 14, 2015 HK638...
- Page 2 12142 Hydraulic Installation Tool (HK638) Alcoa Fastening Systems & Rings...
-
Page 3: Table Of Contents
12142 Hydraulic Installation Tool (HK638) Alcoa Fastening Systems & Rings ontents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–5 afety nstructIons . -
Page 4: S Afety I Nstructions
Huck representative. movement. 11. Only genuine Huck parts shall be used for replacements or If the assembly power tool is fixed to a suspension device, spares. Use of any other parts can result in tooling damage make sure that fixation is secure. - Page 5 12142 Hydraulic Installation Tool (HK638) Alcoa Fastening Systems & Rings afety nstruCtIons (continued) IV. REPETITIVE MOTION HAZARDS: Wear warm clothing when working in cold conditions and 1. When using assembly power tool, the operator can keep hands warm and dry. experience discomfort in the hands, arms, shoulders, neck If numbness, tingling, pain or whitening of the skin in the or other parts of the body.
-
Page 6: Escription
POWER SOURCE: HUCK Powerig® Hydraulic Unit MAX FLOW RATE: 2 gpm (7.6 l/m) HOSE KITS: Use only genuine HUCK Hose Kits rated @ 10,000 psi (689.5 bar) working pressure. 60 lbs (27.2 kg) WEIGHT: HYDRAULIC FLUID: Hydraulic fluid shall meet DEXRON® III, 2.25 in. -
Page 7: P Rinciple Of O Peration
Hydraulic hoses and trigger control cord are connected When the fastener installation is completed, the trigger to the HUCK Powerig® Hydraulic Unit. The trigger is released. The hydraulic pressure is directed to the controls the PULL and RETURN strokes of the tool. -
Page 8: Reparation For Se
CONNECTING THE TOOL hose, with coupler body, into port “R” of tool. Check NOTE: Where a part number (P/N) is given, HUCK trigger assembly for apparent damage or wear If sells that part. Remove shipping caps from pipe plug required, adjust position of trigger assembly on fitting ends. -
Page 9: O Perating I Nstructions
Alcoa Fastening Systems & Rings peratIng nstruCtIons Read and understand all WARNINGs and CAUTIONS before operating or performing maintenance on HUCK equipment. Read p and this entire section reparatIon for before usng this tool. If the tool malfunctions, consult the t... -
Page 10: Aintenance
Use a sharp pointed “pick” to remove imbedded particles from the pull grooves of the jaws. STANDARD SEALANTS, LUBRICANTS Coat pipe plug threads, hose fitting threads, and quick connect fittings with Threadmate™, which is available from Huck in a 4oz. tube as part number 508517. -
Page 11: Isassembly
9. Loosen two screws at rear of switch to remove switch to shred resulting in tool malfunction. from electrical cord. Remove two #6-32 socket setscrews (Threadmate™ is available from Huck in a to dismantle switch for cleaning. Remove cord grip from 4oz. tube as part number 508517.) housing. -
Page 12: A Ssembly D Rawing
12142 Hydraulic Installation Tool (HK638) Alcoa Fastening Systems & Rings 12142 sseMbly rawIng 2.67 in. 112584 Handle-Carrier Assy (6.8 cm) 505094 504683 O-Ring Back-up Ring 505051 O-Ring 503412 Back-up Ring 504677 505052 O-Ring Back-up Ring 126668 Sleeve 505086 Wiper Use with 502035 Setscrews (2) Collet1 Not Shown... -
Page 13: Ubassembly Art Umbers
112721 Release 504683 O-Ring 505051 O-Ring 505086 Wiper 505052 Back-up Ring 590517 HUCK Trademark & Year Sticker Retainer Assembly 112341 includes: Piston Anvil Assembly 112336 includes: ---------- Retainer (not available separately) ---------- Piston Anvil 500804 O-Ring (not available separately) 504677... -
Page 14: Roubleshooting
12142 Hydraulic Installation Tool (HK638) Alcoa Fastening Systems & Rings roublesHootIng Always check the simplest possible cause (such as a loose or disconnected trigger line) of a malfunction first. Then proceed logically, eliminating other possible causes until the cause is discovered. Where possible, substitute known good parts for suspected defective parts. - Page 15 Huck shall not be liable for any loss or damage purpose. resulting from delays or non-fulfillment of orders owing THERE ARE NO WARRANTIES WHICH...
- Page 16 The Future of Tooling Technology, and Tools express, implied, or statutory; all warranties of Productivity are service marks of Huck are contained only in Huck’s written quotations, International. Huck provides technical assistance acknowledgments, and/or purchase orders.
Need help?
Do you have a question about the ALCOA 12142 and is the answer not in the manual?
Questions and answers