Sony SAT-T60 Welcome to DIRECTV & TiVo Instructions (primary manual) Instructions Manual page 23

         

      
This screen appears while the Receiver tests the phone
dialing options and local dial-in number you have chosen. You should see a message
that says "Test Successful!" Press SELECT or RIGHT arrow to continue. If the phone
test does not succeed, you may need to pick a different dial-in number, or change the
dialing format. Use the LEFT arrow to go back to previous screens and make changes
to dialing options.
You've completed Guided Setup. You can now press the TiVo
button on your remote control to go to TiVo Central, or the DIRECTV button to go to
the DIRECTV Menu. You can change your setup options from either of these menus.
Your Receiver should remain connected to your
satellite dish and plugged in to a live power source and a phone line at all times. This
lets it record programs, make daily phone calls, and keep its data up-to-date.
If you take your Receiver with you to a location without
satellite access—for example, on a weekend get-away to a cabin in the Peaceful
Woods—you will still be able to connect it to a television and watch programs saved in
the .
After completing Guided Setup one time, whenever you plug the Receiver in it will
search for a satellite signal. When you see the message "Acquiring Satellite
Information," you can press the TiVo button on the remote control (don't forget the
remote!) to go directly to . From , programs in your
Receiver's are always available. If you start your Receiver without
properly connecting it to a DIRECTV satellite signal, the Receiver will not show live
TV or provide any live TV functions.
Now that you are finished with Guided Setup, you're ready to have fun with
your Receiver! We suggest you start with the five short tours provided in chapter two.