Mode Timer; Paper Settings; Paper Type; Paper Size - Brother MFC MFC-250C User Manual

Chapter 3

Mode Timer

The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
Photo Capture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode. If you choose Off, the
machine stays in the mode you used last.
a
Press Menu, 1, 1.
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.
20

Paper settings

3

Paper Type

To get the best print quality, set the machine
for the type of paper you are using.
a
Press Menu, 1, 2.
b
Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
c
Press Stop/Exit.
Note
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.

Paper Size

You can use five sizes of paper for copies:
Letter, Legal, A4, A5, and 4 × 6 in.
(10 × 15 cm) and three sizes for printing
faxes: Letter, Legal and A4. When you
change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a
Press Menu, 1, 3.
b
Press a or b to choose Letter, Legal,
A4, A5 or 4"x6".
Press OK.
c
Press Stop/Exit.
3
3
3