Wiring Diagram; Pendant Mounting - Sylvania ValueLED Installation Manual

IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE.
GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery
carrier.

WIRING DIAGRAM

PENDANT MOUNTING:

Disassemble the driver box cover by removing the 4 hex head screws keeping them for later. Figure 1
1.
Loosen and remove the 3/4 plug on the top of the driver box cover. Figure 2
2.
Fix the driver box cover on the ¾" pipe. Figure 3
3.
Hang the safety cord attached to the driver to the hook inside the luminaire's main body. Figure 4
4.
Make all wiring connections in accordance with NEC and local codes; If the fixture is equipped with sensor, adjust the sensor
5.
settings. Take relevant waterproof measures after the wires are connected. Figure 5
Fasten and close the luminaire. Figure 6
6.
Replace the screws removed in step 1, the product is installed. Figure 7
7.
FIGURE 1 FIGURE 2
FIGURE 5
FIGURE 3
FIGURE 6
FIGURE 4
FIGURE 7
3989108