Brother FAX FAX-1030E User Manual page 81

Changing the Fax Forwarding Number
You can change the default setting of your fax forwarding number from a remote fax machine.
1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote Access Code (1 5 9
3
When you hear two short beeps, use the dial pad to press 9 5 4.
4
Enter the new number of the remote fax machine where you want your fax messages forwarded,
and then press # #.
You cannot use
press #. Also, if your fax machine is connected to a PABX, you can press # first
before the fax machine's number. The # works as well as R key.
5
To retrieve the Memory Status List, when you hear two short beeps, use the dial pad to press
9 6 1.
6
Use the dial pad to enter the number of the remote fax machine (up to 20 digits), and then press
# #.
7
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. Your fax machine then sends the Memory
Status List showing the new forwarding number to the remote fax machine.
8
Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 to reset it.
and # as dial numbers. However, if you want to store a pause,
Message Centre (Only for FAX-1030e)
).
74