Brother FAX FAX-1030E User Manual page 30

Brother user'sguide fax machine fax-1020e fax-1030e
Hide thumbs Also See for FAX FAX-1030E:
Table of Contents

Advertisement

Setting the F/T Ring Time (Only Applies to F/T Receiving Mode)
You need to determine how long the machine will give its special F/T pseudo-ring when you have a
voice call. This ringing happens after the initial ringing from the phone company. Only the fax
machine rings for 20, 30, 40 or 70 seconds (20, 30, 40 or 55 seconds for New Zealand); no other
phones (extension or external) on the same line rings during the special F/T pseudo-ring.
1
Press Menu/Set, 2, 2.
2
Press
or
call, and press Menu/Set when the screen displays your selection.
3
Press Stop/Exit.
Even if the caller hangs up during the F/T pseudo-ringing, the machine continues
the F/T pseudo-ringing for the set time.
Please note that some faxes cannot be received automatically in F/T mode, because some fax
machines do not send the standard Group 3 calling tone ("CNG")
This machine does not generate F/T ringing tones to any extension
telephones. Any such extension telephones will only ring during the period
set on ring delay.
Recording the Fax/Tel Outgoing Announcement (FAX/TEL OGM)
(Only for FAX-1030e)
This is the announcement played by your machine (not an external TAD) when someone calls and
your machine is set to F/T mode. Although callers hear your announcement, they cannot leave a
message. See Erasing the Outgoing Message (OGM), page 65 for directions to erase the
announcement. The purpose of this F/T message is for the callers to better understand the status of
their call, when your machine is set in F/T receiving mode. If you want to use Message Centre, you
MUST record the Message Centre OGM.
1
Press Menu/Set, 8, 3. The screen prompts you to choose FAX/TEL OGM, MSG CTR OGM
or PAGING OGM.
2
Press
or
3
Press
or
record a message.
4
Replace the handset. Your announcement is played.
5
Press Stop/Exit.
23
Chapter 3
to select how long the machine will ring to alert you that you have a voice
to select FAX/TEL OGM, and press Menu/Set.
to select RECORD MSG and press Menu/Set, then pick up the handset to
, but this is not common.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-1020e

Table of Contents