A
Appendix
On-screen programming
Your DCP is designed to be easy to use with LCD on-screen
programming. User-friendly programming helps you take full
advantage of all the menu selections your DCP has to offer.
Since your programming is done on the LCD, we have created
step-by-step on-screen instructions to help you program your DCP.
All you need to do is follow the instructions as they guide you through
the menu selections and programming options.
Menu table
You can probably program your DCP without the User's Guide if you
use the Menu table that begins on page A-3. These pages will help
you understand the menu selections and options that are found in the
DCP's programs.
Printing reports
The following reports are available.
1.Help List
2.User Settings
3.Network Config
(DCP-310CN only)
1
Menu
Press
2
Press
or
Set
Press
.
3
Press
or
Set
Press
.
4
Mono Start
Press
Prints the Help List so you can see at-a-glance how to
quickly program your DCP.
Lists your settings.
Lists your Network settings.
.
to select Print Reports .
to select the report you want.
.
APPENDIX A - 1