Copying Difficulties - Brother DCP-193C User Manual

Printing (continued)
Difficulty
The printouts are wrinkled.
Cannot perform '2 in 1 ' or '4 in 1 '
printing.
Print speed is too slow.
Colour Enhancement is not
working correctly.
Photo paper does not feed
properly.
Machine feeds multiple pages.
There is a paper jam.
Printed pages are not stacked
neatly.
Machine does not print from
® ®
Adobe Illustrator .

Copying Difficulties

Difficulty
Vertical streaks appear on copies.
Fit to Page does not work properly. Make sure your source document is not skewed. Reposition the document and try
Suggestions
In the printer driver Advanced tab, click Colour Settings, and uncheck
Bi-Directional Printing for Windows
Make sure you are using Brother Original Innobella™ ink.
Check that the paper size setting in the application and in the printer driver are the
same.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Basic tab. Also, click Colour Settings, and make sure you uncheck Colour
Enhancement.
Turn off the borderless feature. Borderless printing is slower than normal printing.
®
(See Printing for Windows
User's Guide on the CD-ROM.)
If the image data is not full colour in your application (such as 256 colour), Colour
Enhancement will not work. Use at least 24 bit colour data with the Colour
Enhancement feature.
When you print on Brother photo paper, make sure you always load one additional
sheet of photo paper first before loading the paper you want to print on.
Clean the paper pick-up roller. (See Cleaning the paper pick-up rollers
on page 75.)
Make sure the paper is loaded correctly in the paper tray. (See Loading paper and
other print media on page 8.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
See Printer jam or paper jam on page 68. Make sure the paper length guide is
adjusted to the paper size. Do not extend the paper tray when you load A5 or
smaller size paper.
Make sure you are using the paper support flap. (See Loading paper and other
print media on page 8.)
Try to reduce the print resolution. (See Printing for Windows
Faxing for Macintosh in the Software User's Guide on the CD-ROM.)
Suggestions
If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanner glass on page 74.)
again.
Troubleshooting and Routine Maintenance
®
or Bi-Directional Printing for Macintosh.
or Printing and Faxing for Macintosh in the Software
B
®
or Printing and
61