Ryobi RBC430SESD User Manual page 25

To stop the product: Place the ignition switch to the "O" position.
Ukrainian mark of conformity
Conforms to all regulatory standards in the country in the EU where the product is purchased.
Run position.
Full Choke position.
Half Choke position
Keep hands away from the blades.
Fully press and release the primer bulb 10 times.
Pull the starter rope.
Lock the throttle in position by depressing the throttle interlock button.
Squeeze throttle trigger to start/run.
Wait for 10 seconds.
EurAsian Conformity Mark
The following signal words and meanings are intended to explain the levels of risk associated with this product.
Symbol
English (Original instructions)
Signal
DANGER
WARNING
Meaning
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
23