FACTO FP003 Operator's Manual page 4

The fireplace must be installed on a secure, horizontal and heat-proof surface, prior to
use.
Parts and Quantities
Part Description
A Top
C Chimney screen
E Fire screen
G Wood holder
I Ash pan
M Bolt M6
O Door
Assembly Instructions:
1. Check that all necessary parts are in the carton. If parts are found missing or
damaged prior to installation, please contact Customer Service.
2. Connect the bottom(J) and 2pcs fire screen(F) with bolts(M) and nuts(N).
3. Connect the fire screen(E) and 2pcs fire screen(F) with bolts(M) and nuts(N).
4. Connect the fire screen(F) and the rooftop(D) .
5. Connect the door(O) and the fire screen(F).
6. Connect the handle(P) and the door(O).
7. Connect the handle(H) and the ash pan(I).
8.
Put the ash pan(G) into the bottom(J).
9.
Put the wood holder(G) on the ash pan(I)
10.
Connect the chimney screen(C) and the rooftop(D).
11. Connect the chimney screen(C) and the chimney screen(B).
12. Put the top(A) into the chimney screen(C).
Make sure all connections are tight.
13.
.
CAUTION!
Quantity Part Description
1pc B Chimney screen
2pcs D Rooftop
1pc F Fire screen
1pc H Handle of ash pan
1pc J Bottom
24pcs N Nut M6
1pc P Handle of door
.
Quantity
2pcs
1pc
2pcs
2pcs
1pc
24pcs
1pc