CLOCK/ LANG
(Items to set clock and language)
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
How to set
(HOME MENU) t page 84
CLOCK SET
See
.
page 25
AREA SET
You can adjust a time difference without
stopping the clock.
Set your local area using
your camcorder in other time zones.
Refer to the world time difference on page
125.
DST SET/SUMMERTIME
You can change this setting without
stopping the clock.
Set to [ON] to move the time forward
1 hour.
LANGUAGE SET
You can select the language to be used on
the LCD screen.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot
find your native tongue among the
options.
96
/
/
when using
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch
to change the page.
How to set
(HOME MENU) t page 84
The default settings are marked with B.
DEMO MODE
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you turn on your camcorder
and light up the
z Tips
• The demonstration will be suspended in
situations such as those described below.
– When you press START/STOP or PHOTO.
– When you press DUBBING button (HDR-
UX20)
– When you touch the screen during the
demonstration. (The demonstration starts
again after about 10 minutes.)
– When you slide the disc cover OPEN switch.
– When you light up the
sliding the POWER switch.
– When you press
IMAGES).
REC LAMP (Recording
lamp)
The camera recording lamp on the front of
your camcorder lights up, as the default
setting is [ON].
CALIBRATION
See page 132.
(Movie) lamp.
(Still) lamp by
(HOME)/
(VIEW
/