About The Dvd-Player - AEG DVD 4530 Instruction Manual & Guarantee

Available languages

English

Fig. 2/12

Switching on the player

Fig. 1/1

05-DVD 4530_GB.indd 42

Optical

Connect an optical cable for transmitting the digital audio signal with

your playback device or amplifi er.

1. Insert the optical plug into the socket on the rear of the device.

2. Insert the optical plug into the corresponding socket of your playback

device or amplifi er.

Turn the DVD player on by pressing the „STANDBY" button on the front of

the device.

About the DVD-Player

With this DVD-Player you can play a vast variety of DVD-formats

➯ Page 34, „Technical data".

However, you must be aware that in many cases DVDs are encrypted with

a so-called "Regional Code". This specifi es for which region in the world

the DVD is intended. As an example, the DVDs marked with regional code

"1" are intended for the USA and Canada. DVDs with regional code "2" are

for use in Europe.

NOTE:

With your DVD-Player you can only play DVDs with regional code "2".

There are both lots of burning and compressing methods as well as

high quality diff erences in (burned) CDs/DVDs. Moreover, the music

industry has not yet agreed on a fi xed standard for copy protection.

This may, in very isolated cases, result in problems when relaying CDs,

DVDs and MP3 CDs. This is no malfunction of the player.

Furthermore, there may be isolated problems when playing CDs or DVDs

which were created on a PC (e.g. holiday photographs). In case of pro-

blems check the settings of the DVD writing program on your computer.

You should in particular make sure that the DVD has been fi nalized. For

further information on this matter please refer to the operating manual

of your recorder.

Input Not Possible

If a function or input selected by you is not possible, the adjacent symbol

is shown on the screen.

19.02.2008 16:06:13 Uhr

Table of Contents