Table of Contents
Advertisement
Introducing MOVERIO Link Pro
The "MOVERIO Link Pro" app allows you to make a variety of settings for the headset.
The following outlines the main features of the "MOVERIO Link Pro".
Available features vary depending on the model of the headset you are using.
Feature
Adjust Brightness
Adjust using a slide bar Adjusts the brightness of the headset screen.
Adjust Volume
Adjust using a slide bar Adjusts the volume.
Power Saving
On/Off
3D Display
On/Off
Auto Brightness
On/Off
Adjustment
Tap to Hide Images
On/Off
Movement Usage
On/Off
Warning
Notification of Reduced
On/Off
Sensor Accuracy
*On the BT-30C, the screen of this device dims, but the headset screen does not close.
Setting
When this is set to On, the screen goes dark after 10 seconds if no op-
erations are performed on the device's screen. Also, the screen closes
if the headset remains stationary for more than five seconds when it is
not being worn.
When this is set to On, the headset screen is displayed as 3D.
When this is set to On, the headset's screen brightness is automatically
adjusted to match the brightness of your surroundings.
When this is set to On, movies pause when you tap the left side of the
headset with your fingertips (audio does not stop). Tap the left side
again with your fingertips to restart the movie.
Tap the left side of the headset twice with two fingertips.
When this is set to On, a popup note is displayed when you connect
the headset to warn you about moving while wearing the headset.
When this is set to On, a notification is displayed when the accuracy of
the sensor is reduced.
Description
Model Name
BT-4x
BT-30C
BT-4xx
-
*
-
-
-
29
Advertisement
Table of Contents
