Safety Instructions - Honeywell S1 Instruction Manual

1. Safety instructions


WARNING!
Danger of electrostatic discharge – only use a damp cloth to clean.
 WARNING!
If there is danger that the device can be damaged from falling
(pointed, sharp-edged or heavy) objects, the operator must protect
the device.
 WARNING!
Exposure to danger which can result from a chemical reaction
between parts of the meter and chemical substances in the vicinity
must be discussed with the manufacturer and the cause must be
eliminated.
 WARNING!
The gas meter in which the encoder is installed must be integrated
into the equipotential bond, e.g. by connecting it to the grounded
pipeline.

INFORMATION!
Compliance with the specified operating and ambient conditions
as indicated on the type label and the gas meter type label is
absolutely essential for the safe operation of the encoder.
73024510a © Elster GmbH | All rights reserved. Subject to modification
Honeywell
9