Specifications - Sharp UA-PM50E Operation Manual

SYMPTOM
GLUE SHEET Lamp is fl ashing
No mosquitoes are collected on the
Glue Sheet.
When the adhesive glue remains on
clothes, skin, fl oor, etc.
SLEEP lamp is fl ashing.

SPECIFICATIONS

Power supply
Fan Speed
Fan
Speed
Rated Power (W)
Operation
Airfl ow (m
Recommended Room Size(m
High density Plasmacluster ion recommended room size (m
Cord Length (m)
Dimensions (mm)
Weight (kg)
*1 The fan speed is automatically switched depending on the amount of impurities in the air.
*2 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes
(JEM1467).
*3 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
centre of the room (at a height of approximately 1.2 meters from the fl oor) when the product is
placed next to a wall and run at the MED fan speed.
Standby Power
It's replacement timing of glue sheet.
Please exchange to new glue sheet.
Then, press the Mosquito Catcher button for 3 sec.
• Aren't windows or doors opened?
• Don't you set up in the place where the wind blows such as air-
conditioner or fan?
⇒ Try to relocate the unit.
• Wipe with cooking oil, then wash with soap and water.
• Fan motor error. Turn the power OFF. Wait one minute, and
then turn the power ON.
3
/hr)
)
2 *2
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
REMEDY (not a malfunction)
220-240V
MAX
51
306
2
) *3
394(W)x281(D)x540(H)
E-17
50-60Hz
*1
MED SLEEP
17 4.0~6.0
186 48~90
~40
~23
2.0
6.1