AOC SPT6531V User Manual page 27

Shortcut tools
Ethernet: click to ON/OFF ethernet network.
WLAN: click to open or close WLAN network.
Hotspot: click on the icon to turn it ON/OFF.
Touch Sensing: click to turn the touch sensing function
on or off; once it is on, the backlight dims when the
system is run by the users and resumes gradually to
the default value after idling for 5 seconds; this help in
protecting the sight of users.
Screenshot: take a screenshot of the current page (either
the entire or a given scope of the screen); you may
insert the screenshot directly into the whiteboard.
Eye Comfort: click to turn the eye comfort function on
or off; when this is on, the channel dim its blue light into
yellow light mode to protect sight of users.
Child Lock: press and hold the 5S child lock icon to
unlock it.
Energy Saving: dim the backlight.
Timer:
1. Select 00:00 to enable the count up function.
2. Select a time other than 00:00 to enable countdown
function; click on the bell icon to enable the system
to sound a reminder once reaching the time set.
3. Display time counting in full screen.
Vote: click to open it.
Screen Record: click on it to enable the screen record
function.
Icon Operations: click
Recording time
Suspend / resume
screen recording
Stop screen recording and exit
ON/OFF environment sound
VGA screen setup
When connected to VGA source: click on the "Screen
setup" in shortcut tool to set up VGA options.
Screen setup: horizontal positioning, vertical positioning,
timing, phase, auto adjustment. When sliding the bar
to adjust horizontal positioning, vertical positioning,
timing and phase the digital values change accordingly;
when clicking on the "Auto adjustment," the setup page
disappears and the auto adjust page is displayed;
subject to any place beyond the setup area to exit the
window.
Note: this function is available only in interface source of
the VGA signal.
DVI audio setup
When connected to DVI source: click on the "DVI audio
channel" in shortcut tool to set up the DVI options.
Option of audio source: analog (default) and digital.
Click on any place on the screen beyond the setup area
to close this window.
Note: this function is available only in interface source
of DVI signals.
20