Sony DCR-SX45 Operating Manual page 24

Tips

You can capture photos from recorded movies.

See page 55 on the recordable time of movies.

You can check the recordable time, estimated remaining capacity, etc., by touching

[Show others]  [MEDIA INFO] (under
The LCD screen of your camcorder can display recording images across the entire screen (full pixel

display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to
[ON], and record images using the outer frame displayed on the screen as a guide.
[ STEADYSHOT] is set to [STANDARD] in the default setting.

To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and

then adjust the angle ().
 90 degrees (max.)
 180 degrees (max.)
Data code during recording
The recording date, time and condition are recorded automatically on the recording media.
They are not displayed during recording. However, you can check them as [DATA CODE]
during playback. To display them, touch
SET] (under
Shooting photos
In the default setting, photos are recorded on the following recording media.
DCR-SX45: Memory card
DCR-SX65/SX85: Internal memory
Tips

See page 19 on changing the recording media (DCR-SX65/SX85).


Press MODE to turn on the
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.
US

[PLAYBACK] category)  a desired setting 
[MANAGE MEDIA] category).
(MENU)  [Show others]  [PLAYBACK
(Photo) lamp.
(MENU) 
 90 degrees to
the camcorder
 
.