Specifications - Makita DA330D Instruction Manual

ENGLISH (Original instructions)
1-1. Button
1-2. Battery cartridge
2-1. Switch trigger
3-1. Lamp

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
Explanation of general view
4-1. Lamp
5-1. Reversing switch
6-1. Chuck key
7-1. Sleeve
Model
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
noise level determined
) : 70 dB (A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
DA330D
10 mm
12 mm
0 - 800
298 mm
1.1 kg
D.C. 10.8 V
ENE032-1
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG905-1
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Drill
Model No./ Type: DA330D, DA331D
are of series production and
ENG900-1
Conforms to the following European Directives:
2006/42/EC
sum)
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
ENG901-1
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
000230
3
8-1. Chuck key holder
8-2. Hook portion
8-3. Slot
8-4. Rail
Corporation as
8.5.2012
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
DA331D
10 mm
12 mm
0 - 800
310 mm
1.1 kg
D.C. 10.8 V
ENH101-16
the responsible