ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Cutting action changing lever
3-1. Blade holder
3-2. Bolt
3-3. Hex wrench
4-1. Bolt
4-2. Blade
4-3. Roller
5-1. Hook
5-2. Hex wrench
6-1. Dust cover
7-1. Cutting line
SPECIFICATIONS
Length of stroke
Strokes per minute (min
Max. cutting capacities
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Noise
The
typical
A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The
vibration
total
determined according to EN60745:
Explanation of general view
7-2. Base
9-1. Hex wrench
9-2. Bolt
9-3. Base
10-1. Edge
10-2. Graduation
11-1. Bolt
11-2. Hex wrench
11-3. Base
12-1. Starting hole
15-1. Dust cover
15-2. Hose
16-1. Rip fence (Guide rule)
17-1. Bolt
Model
-1
)
Blade type
Wood
Mild steel
Aluminum
Overall length
Net weight
Rated voltage
noise
level
determined
) : 82 dB (A)
pA
) : 93 dB (A)
WA
value
(tri-axial
vector
JV143D
18 mm
0 - 2,900
B type
65 mm
6 mm
10 mm
245 mm
1.9 kg
D.C. 14.4 V
ENE019-1
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
ENG900-1
power tool can differ from the declared emission
value depending on the ways in which the tool is
sum)
used.
4
17-2. Fence guide
17-3. Hex wrench
17-4. Rip fence (Guide rule)
18-1. Fence guide
18-2. Rip fence
18-3. Threaded knob
18-4. Pin
19-1. Rip fence
20-1. Aluminum base
20-2. Anti-splintering device
21-1. Cover plate
21-2. Aluminum base
JV183D
18 mm
0 - 2,900
B type
65 mm
6 mm
10 mm
248 mm
2.0 kg
D.C. 18 V
2
) : 7.0 m/s
h,B
2
2
) : 4.5 m/s
h,M
2
ENG901-1