Advertisement
4
Stool Assembly
Where purchased
This active chair features a return spring which controls the reclining mechanism to work with the user, making
it more or less easy to fully recline - additional parts have been provided to allow those who prefer to have more
resistance from the spring.
To customize the chair and make it MORE resistant, please follow these steps:
•
Carefully lay the chair on its side and open the zip to reveal additional discs.
•
Insert a thin screwdriver or similar flat object into the hole and pull the pin out (be aware this requires a little
force).
•
You will then be able to place one or two discs between the pin and the cylinder (containing the spring) to adjust
the mechanism.
•
Release the pin and the disc(s) will be held in place.
•
Close the zip and carefully return the chair to an upright position.
D
C
B
5
Where relevant
E
F
Advertisement
