Download Table of Contents Print this page

Canon CR-G100 Instruction Manual page 27

Ip camera controller

Advertisement

Table of Contents
4 Configuration
Menu item
[Max speed for preset]
[Pan (30 – 120)],
[Tilt (30 – 120)]
[Roll (30 – 90)]
[Acceleration]
[Pan (45 – 150)],
[Tilt (45 – 150)]
[Roll (45 – 113)]
[Restore Default Settings]
In most cases, use the default maximum speed and acceleration values set in the [Control] tab settings.
If the [Control] tab's maximum speed and acceleration values are changed, the system may not work
correctly depending on the lens and used and the selected combination of speed values. Be sure to
sufficiently test the system when the speed values are changed.
Setting options and additional information
Select the maximum pan/tilt/roll speed used when moving the camera
head to a preset position. To change the setting, remove the checkmark
from the [Default] box.
30 to 120 (30)
30 to 90 (30)
Select the acceleration used for pan/tilt/roll movements. To change the
setting, remove the checkmark from the [Default] box.
45 to 150 (45)
45 to 113 (45)
Click this button to reset all the settings in the same tab to their initial
values. The changes are not saved until you click [OK].
27
Menu Settings and Operations

Advertisement

Table of Contents
loading

Table of Contents