Download Table of Contents Print this page

Checking The System With The Status Screen; Setting The System To Ready Status - Canon CR-G100 Instruction Manual

Ip camera controller

Advertisement

Table of Contents
4 Configuration

Checking the System with the Status Screen

Checking the System with the Status Screen
Click the [Status] tab to display an overview of relevant information about the system. In the information screen you can
check the connected devices registered and their connection status as well as the motion range limits on all axes. You
can also set the IP controller to READY status or clear this status.

Setting the System to READY Status

Click [Set READY] in the [Status] screen to switch the system to READY status (standby for the main shooting session).
Click [Clear READY] to clear the READY status.
Check that the system is in READY status before starting the main shooting session.
24

Advertisement

Table of Contents
loading

Table of Contents