Download Table of Contents Print this page

Elements Of The Main Operation Panel; Homing The Camera Head - Canon CR-G100 Instruction Manual

Ip camera controller

Advertisement

Table of Contents
4 Configuration

Elements of the Main Operation Panel

Click the [Operation] tab to display the following screen.
1
Range of motion control area
2
Shooting parameters area
3
Live view display area
4
Number of remaining available shots
5
Rotate button
 Rotates the live view image 90° clockwise.
6
Camera head control area
7
Shooting control area

Homing the Camera Head

When using a camera head, click [Homing] to perform the camera head's homing procedure and mechanically reset the
camera head's pan, tilt, roll and zoom to their initial positions: pan/roll – 0°, tilt – 90°, zoom – 0 (wide-angle end).
Be sure to perform the homing procedure immediately after turning on the camera head and just before
turning it off.
In the Robotic Camera Head Settings menu (A 26), you can select which axes are reset with the homing
procedure (pan/tilt/roll/zoom).
Elements of the Main Operation Panel
18

Advertisement

Table of Contents
loading

Table of Contents