Customer Care Europa & Africa
© 2002 SCCE Training Group
Mechanical faults
B-cover damaged
Wrong connector assembling
B-cover damged
When assembling the B-cover with UI (MU4)- and CMT (MA4)- module often the screw holes from B-cover are damaged.
This is caused by wrong screw lengths at wrong place or wrong tightening.
of17Ncm.
Note! For right replacement of the screws, refer to chapter "Assembling instructions (screws)"
Wrong connector assembling
When assembling the connector J602 (stereo out) it is necessary to check the correct assembly. (See picture below)
npm_5_repair_v1_0.doc
Wrong
assembled
CONFIDENTIAL
Product NPM-5
Introduction
Date 08.04.2002
The screws must be tightened with a torque
Broken screw hole
Correct
Checked by:
SCCE Training Group
9(11)
Repairhints
Version 1.0 Approved
Approved by:
SCCE