General Warning - Eurotrac W11E Operation Manual

1.2

General warning

Foreword
These operating instructions apply to all users of the loader: company manager, department head, driver and other
personnel associated with or working near the loader.
WARNING
1. Read this manual and follow the instructions in the manual before using the loader.
2. Read the instructions on the loader carefully and keep the text legible.
3. All operators must read this manual.
4. All personnel qualified to use the loader can operate the loader in accordance with safe use regulations.
5. When the machine is idle, do not let other people touch the machine.
6. Do not use if the loader does not work properly.
7. Do not use the loader for work that exceeds its maximum load or maximum capacity.
8. Do not use the loader to perform work beyond its scope of use.
9. Be familiar with the safe operating rules associated with using this loader and follow the rules exactly.
10. The manufacturer assumes no responsibility for the consequences of dismantling or modifying the loader.
Obligation to read the manual
The company manager must familiarize the operator with the operating rules of
the manual.
Read the entire chapter before attempting to operate the loader. It is the
responsibility of the company manager to ensure that the operating rules in the
manual are implemented. The operator must read and be familiar with the
instruction manual so that it can be operated in accordance with the rules when
starting and using the loader. This instruction manual should be kept intact during
the life of the loader, even if the machine is resold, replaced by the user or
manager, etc.
This manual is not a training manual, but it can also be used as one of the training
materials if it is really necessary to train the operator.
General instructions
The company manager must ensure that the operating manual (including the
certificate of conformity issued by the European Community) is delivered with the
loader.
• When the product leaves the factory, the manual will be included.
• The product certificate is sent along with the shipping order. Under the
authority of the company manager, the trained personnel and the person
with the relevant driver's license can operate the loader and the operation
must not exceed the scope of the machine design. The loader must be
operated in accordance with the conditions specified by the manufacturer in
the operating manual. The manufacturer will not be liable for any personal
injury, property damage and environmental pollution caused by failure to
follow the procedures specified in the instruction manual. The
manufacturer's responsibility is to match the assembly structure of the
machine to the instructions in the certificate of conformity. Before each use,
the driver should check that the machine is all right. It is forbidden to use the
loader without checking the machine and without checking the warning
decals.
Page 5/72
W11E | Operation manual October 2019