World Time; Checking World Time - Casio 3495 Operation Manual

4.
Configure the date and time settings.
To reset the seconds to 00: Press (D).
●
1 is added to the minutes when the
current count is between 30 and 59
seconds.
For all the other settings, use (B) and (D)
●
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Press (C) eight times.
This causes [12H] or [24H] to flash on the
display.
Watch Operation Guide 3495
4.
Press (D) to toggle the setting between
[12H] (12-hour timekeeping) and [24H]
(24-hour timekeeping).
12-hour timekeeping
5.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Home City
You can view the current time in 48 cities (31
time zones), and UTC (Coordinated Universal
24-hour timekeeping
Time) time.

Checking World Time

1.
World Time number

World Time

Enter the World Time Mode.
Navigating Between Modes
l
Entering the World Time Mode causes the
World Time number and city name to
appear first. After that, the display will
appear as shown below.
World Time
Home City time
To change the selected World Time
●
city, press (D).
12