HAMPTON BAY Angelina Instruction Manual

HAMPTON BAY Angelina Instruction Manual

Interior 3-light semi-flushmount

Advertisement

TROUBLESHOOTING:

Possible Cause
1. Bulb is burned out
Bulb will not light
2. Switch is off
3. Faulty wire connection
Fuse blows or circuit
Crossed wires or power
breaker trips when light
wire is grounding out
is turned on

PRODUCT MAINTENANCE:

1. To clean the outside of the lamp, use a dry or slightly dampened clean cloth (use
clean water, never a solvent) to wipe the shade and surface of the lamp.
2. To clean the inside of the fixture, first disconnect power to the fixture by turning
off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or
slightly dampened clean cloth (use clean water, never a solvent) to wipe the inside
shade and interior surface of the fixture.
3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship
for a period of five (5) years from date of purchase. This warranty applies only to the original consumer
purchaser and only to products used in normal use and service. If this product is found to be defective, the
manufacturer's only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer's discretion, provided that the product has not been damaged through misuse, abuse, accident,
modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is
found to have been improperly installed, set-up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident,
misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material
or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface
and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and
specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other
than the warranty contained herein. The manufacturer specifically disclaims any liability and shall
not be liable for any consequential or incidental loss or damage, including but not limited to any labor
expense costs involved in the replacement or repair of said product.
Page 8
Corrective Action
1. Replace light bulb
2. Make sure switch is on
3. Check wiring
Check wire connections
INSTRUCTION MANUAL
INTERIOR 3-LIGHT SEMI-FLUSHMOUNT
ANGELINA
HOME DEPOT SKU 598-318 | S/O: 426-484 (UPC 773546217477)
RUSTIC FINISH
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Angelina and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HAMPTON BAY Angelina

  • Page 1 Possible Cause Corrective Action INTERIOR 3-LIGHT SEMI-FLUSHMOUNT 1. Bulb is burned out 1. Replace light bulb ANGELINA Bulb will not light 2. Switch is off 2. Make sure switch is on HOME DEPOT SKU 598-318 | S/O: 426-484 (UPC 773546217477) 3.
  • Page 2 INSTALLATION: Thank you for purchasing this Hampton Bay interior decorative lighting. This product has been manufactured with the highest standards of safety and quality. Black Wire Ground Wire 1. Junction Box White Wire (not included) FEATURES: This contemporary but classic semi-flushmount with a rustic finish complements any décor with its timeless look and style.
  • Page 3 ADDITIONAL PARTS FOR INSTALLATION (included): TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included): 2. Cross Bar 3. Outlet Box 4. Mounting 6. Decorative Screw (x2) Screw (x2) Cap (x2) Safety goggles Wire Strippers Wire Cutters Flathead Screwdriver 7. Ground Screw 14.
  • Page 4 ASSEMBLY INSTRUCTIONS: ASSEMBLY: 1. Carefully unpack the fixture; Layout all parts on a clean surface. 2. Install A19 Bulb 60W max.(not included). 3. Attach fabric shade (8) to the bottom of nipple (9). 4. Install metal washer (10), washer (11), diffuser (12) and over bottom nipple (9) and secure them by fastening decorative finial (13) onto bottom nipple (9).

This manual is also suitable for:

598-318

Table of Contents