PUTCO RAM 1500 Instruction Manual

Molle panels

INSTRUCTION GUIDE

Congratulations on your purchase of a high quality PUTCO

you need any application or technical assistance, feel free to call us at:

Monday-Friday 8:00am - 5:00pm (Central Standard Time)

Contact your PUTCO

PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION

AND CHECK TO SEE THAT ALL PARTS ARE INCLUDED

REQUIRED TOOLS

PHILLIPS SCREWDRIVER

RAM 1500

SIDE PANEL

1-800-247-3974

dealer for other quality accessories.

T30 TORX DRIVER

DESCRIPTION

Molle Side Plate

Single-Flange Side Mounting Brackets

Double-Flange Side Mounting Brackets

M6 Torx-Head Bolt

5/16" Well Nut

8-32 X 3/4" Philip's Head Screw

product. Should

QT Y

1952XXI-SP

Table of Contents

Do you have a question about the RAM 1500 and is the answer not in the manual?

Page 1 INSTRUCTION GUIDE RAM 1500 SIDE PANEL Congratulations on your purchase of a high quality PUTCO product. Should ® you need any application or technical assistance, feel free to call us at: 1-800-247-3974 Monday-Friday 8:00am - 5:00pm (Central Standard Time) Contact your PUTCO dealer for other quality accessories.
Page 2 MOLLE Panels Instruction Guide INSTALLATION INSTRUCTIONS Begin by gathering all four of the Single-Flange Side Mounting Brackets and all four of the Double-Flange Side Mounting Brackets. Loosely assemble two 5/16” Well Nuts and two Philip’s Head Screws onto each of these brackets as shown.
Page 3 MOLLE Panels Instruction Guide Fasten the side plate to its brackets using the provided M6 Torx-head screws and a T30 Torx driver. Now that everything is installed, ensure that all fasteners have been tightened until snug, but do not overtighten. Your new MOLLE Panel is now successfully installed on your vehicle!