KitchenAid KUDR204KSB Use And Care Manual And Installation Instructions page 11

Max Cool:
The Max Cool feature assists with
periods of heavy usage, full grocery
loads or temporarily warm room
temperatures
Max Cool will reset the temperature for
the refrigerator drawer to 32 °F (0 °C) and -3 °F (-19.4 °C) for
the freezer drawer for a 24 hour period.
Press MAX COOL to activate Max Cool feature.
NOTE: The temperature display will remain at -3 °F (-19.4 °C)
and the indicator light will remain On for a 24-hour period
unless any of the following happens:
User adjusts any of the compartment temperatures.
Cool Off Mode is entered (activated by user).
Sabbath Mode is entered (activated by user).
After 24 hours, the temperature will automatically return to
the previous temperature set point and the indicator light
will turn Off.
NOTE: If the previous temperature set point was set to Soft
Serve in the freezer drawer, the temperature will return to
the recommended temperature 0 °F (-17.7 °C) instead when
Max Cool is complete.
Sabbath Mode:
Sabbath Mode is designed for the traveler
or for those whose religious observances
require turning off the lights.
By selecting this feature, the temperature
set points remain unchanged but the
control panel lights, interior lights, and
control audio turn off. For most effi cient
refrigerator drawers operation, it is recommended to exit the
Sabbath Mode when it is no longer required.
Press and hold SABBATH for 3 seconds to turn on the
feature. After the 3-second countdown, the feature will
activate and all other displays will turn Off.
Press and hold SABBATH for 3 seconds to turn off the
feature and turn on the display.
Drawer open:
If any drawer is open longer than 5 minutes, an alarm will
sound every 2 minutes until all drawers are closed or any
control is pressed.
Over Temp Alarm:
NOTE: If the Over Temp Alarm activates, your food may spoil.
See "Power Interruptions". Minimize opening of drawers until
temperatures return to normal.
The Over Temperature feature is
designed to let you know when either the
refrigerator drawer temperature rises
above 45 °F (7 °C) or the freezer drawer
temperature rises above 6 °F (-14.4 °C)
for 4 hours or longer. The audio alarm will
05-May-2021 10:43:59 EDT | RELEASED
shut off automatically when the temperature returns to normal.
To let you know an Over Temperature condition occurred, the
indicator light will continue to flash until the Reset Alarm touch
pad is pressed.
If the over temperature condition is still present when an Over
Temp reset is performed, the indicator light will continue to
reactivate every 4 hours until refrigerator and freezer
temperatures are below 45 °F (7 °C) and 15 °F (-9 °C),
respectively.
NOTE: These features will not appear on your control unless
your refrigerator is over temperature and the alarm requires a
reset.
Showroom Mode:
This mode is used only when the refrigerator is on display in a
retail store. If you unintentionally turn on Showroom Mode,
Cool Off will light up on the display, and the controls will
appear to work. Exit Showroom Mode by pressing and holding
COOL ON and SABBATH at the same time for 3 seconds.
IMPORTANT:
After connecting the refrigerator to a water source or replacing
the water fi lter, fi ll and discard three full containers of ice to
prepare the water fi lter for use before using ice.
Turning the Ice Maker On/Off:
IMPORTANT:
Use the Icemaker touch pad on
the control panel to turn on or
off the ice maker. Do not adjust
the wire arm located on the ice
maker.
Press the ICEMAKER touch pad to turn on the ice maker.
The indicator light will illuminate when On.
Press the ICEMAKER touch pad to turn off the ice maker.
REMEMBER:
Allow 24 hours to produce the first batch of ice.
The quality of your ice will only be as good as the quality of
the water supplied to your ice maker.
Avoid connecting the ice maker to a softened water supply.
Water softener chemicals (such as salt) can damage parts
of the ice maker and lead to poor quality ice. If a softened
water supply cannot be avoided, make sure the water
softener is operating properly and is well maintained.
Do not store anything in the ice storage bin.
When the refrigerator is turned ON for the first time, ice
maker is turned OFF. (The ice maker indicator light will dim).
After confirming that water can be automatically supplied to
the ice maker (connecting the refrigerator to the water
source or replacing the water filter, press the ICEMAKER
touchpad to turn on the ice maker. (The indicator light will
iluminate). When the water cannot be supplied automatically
(not connecting to the water source, etc.) and the ice box is
not filled with ice, if the ice maker is turned ON, the ice
maker will continue to operate and the internal heater of ice
maker will operate frequently. This will heat up the
refrigerator, increasing the compressor running rate and
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Ice Maker and
Water Filtration System
(Refrigerator/Freezer Drawers only)
11