Warning Indicators And Messages - Sony DSC-H20 Cyber-shot&reg Handbook

Warning indicators and
messages
Self-diagnosis display
If a code starting with a letter of the alphabet appears, the self-diagnosis function on the camera
is working. The last two digits (indicated by
camera.
If you cannot solve the problem even after trying the following corrective actions a few times,
the camera may need repair.
Contact your Sony dealer or local authorized Sony service facility.
C:32:
ss
• There is trouble with the camera's hardware. Turn the power off and on again.
C:13:
ss
• The camera cannot read or write data on the "Memory Stick Duo" media. Try turning off and on the
camera again, or taking out and inserting the "Memory Stick Duo" media several times.
• The internal memory has experienced a format error, or an unformatted "Memory Stick Duo" media
is inserted. Format the internal memory or the "Memory Stick Duo" media (page 97).
• The inserted "Memory Stick Duo" media cannot be used with the camera, or the data is damaged.
Insert a new "Memory Stick Duo" media.
E:61:
ss
E:62:
ss
E:91:
ss
• A camera malfunction has occurred. Initialize the camera (page 89), then turn the power on again.
Messages
If the following messages appear, follow the instructions.
• The battery level is low. Charge the battery pack immediately. Depending on the conditions of use or
the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of
remaining battery time left.
For use with compatible battery only
• The battery inserted is not an NP-BG1 (supplied)/NP-FG1 (sold separately) battery pack.
) will differ depending on the state of the
ss
135 GB
Continued r