Advertisement
Seite 6 / 6
»
MOUNTING ADVICE
Installation is made by gluing the sensor base plate to the smooth wall surface using the adhesive tape included. If required, the base plate can
also be fixed by means of Rawlplugs and screws.
Housing open / close
Snap the upper part of the housing into the locking lug
on the upper side
»
DIMENSIONS (MM)
»
ACCESSORIES (INCLUDED IN DELIVERY)
Adhesive foil for fixing the base plate
»
ACCESSORIES (OPTIONAL)
Rawlplugs and screws (2 pcs. each)
Battery ER14505 (Lithium 3,6V AA)
Thermokon Sensortechnik GmbH- Platanenweg 1 - 35756 Mittenaar - Germany - Tel.: +49 2778 6960-0 - Fax: -400
NOVOS_3_SR_(x)_(rH)_EasySens_Datasheet_en.docx © 2020
Fix the upper part of the housing on the underside
with the screw
www.thermokon.de email@thermokon.de
Stand: 03.11.2020
Item No. 773386
Item No. 102209
Item No. 759182
Advertisement
