Block-Specific Error Messages - Siemens SIMATIC Ident Operating Instructions Manual
Hide thumbs
Also See for SIMATIC Ident:
- System manual (362 pages) ,
- Function manual (142 pages) ,
- Operating manual (80 pages)
Table of Contents
Advertisement
A.3.5
Block-specific error messages
The following table lists the block-specific error codes that can occur when working with
optical handheld readers, access control readers or serial devices.
Table A- 4
Error ID
0xE1FE0300
0xE2FE0100
0xE4FE0400
0xE4FE8D00
0xE5FE0400
0xE6FE0100
0xE6FE0500
SIMATIC RF120C
Operating Instructions, 02/2021, C79000-G8976-C328-03
Block-specific error messages
Meaning
Address error in command (≠ "0x0000", "0x0002", "0xFFFF")
Negative acknowledgment or bad frame from the reader
New data was received before existing data was fetched.
•
Scan operation: The newest data is lost.
With the "Write" command, the oldest acknowledgments are lost without an error
message being generated.
Internal communication error
Invalid data block number (DBN) on the reader/communication module
Unknown command, incorrect command parameters or unauthorized command
chaining (incorrect length specification)
"Reset_Reader" necessary
A.3 Connection of serial devices via Freeport protocol
Appendix
53
Advertisement
Table of Contents
