Preferences - AEG DVD 4404 HC Instruction Manual & Guarantee

SPDIF/PCM: This option should be selected if the DVD
is connected to a two-channel digital mode or stereo
amplifi er. If a Dolby Digital or MPEG CD is played back,
the output of the coaxial port is in PCM two-channel for-
mat. These programmes have an uncompressed digital
stereo soundtrack for improved sound quality. During
playback a discreet stereo sound can be heard from the
front left-hand and right-hand loudspeaker.
Note: If a built-in amplifi er is used, the audio output must
be set to analogue, as otherwise the rear and central
loudspeaker will not receive any output signals.
SPDIF/RAW: Select this option if the DVD player is
connected to an amplifi er via the optical DIGITAL OUT.
The amplifi er that is to be connected must have Dolby
Digital decoding.
DUAL MONO
STEREO, for separate playback of both channels (as
"stereo").
L MONO or R MONO, if the left-hand or right-hand
sound channel is to be played back through both front
loudspeakers (e.g. in the case of separate spoken
language).
MIX MONO, for mixed playback of both channels.
COMPRESSION
Dynamic Range Compression
Dynamic Range Compression reduces volume change
by letting you adjust the difference between soft and
loud sounds.
5....-05-DVD 4404 AEG GB 27
• Press up/down button to set Dynamic Range Com-
pression to 2/8 through FULL or to turn it OFF, then
press ENTER.
• To hear the full range of range of sounds as recorded,
choose OFF or a lower ratio such as 2/8. To minimize
the difference in volume between lound segments
and quiet scenes, choose a higher ratio such as 6/8
or FULL.
LPCM OUTPUT
LPCM 48K:
In the linear PCM setting „48K" means that the maximum
„Digital Output Sampling Rate" is 48 KHz. If the encoded
sampling rate of the title track is 96 KHz the output is
forcibly converted to 48 KHz.
LPCM 96K:
If „96K" has been selected the maximum output samp-
ling rate is 96K and no enforced conversion takes place.

PREFERENCES

The PREFERENCE menu can only be opened in stop
mode.
TV DISPLAY
NORMAL/PS: Pan scan. Select when the unit is con-
nected to a conventional TV. Video material formatted in
the Pan Scan style is played back with the left and right
edges are cut off.
NORMAL/LB: Letter Box. Select when the unit is con-
nected to a normal TV. Wide-screen images are shown
on the screen with a black band at the top and bottom.
WIDE: Select when the unit is connected to a wide-
screen TV.
27
02.09.2004, 9:29:46 Uhr