Attaching The Cuff; Adopting The Correct Posture - Silvercrest SBM 68 Instructions For Use And Safety Notes

Bring the device to room temperature before the meas-
urement.

attaching the cuff

attentiOn! The device may only be used in conjunc-
tion with the original cuff provided. The cuff is suitable
for an arm circumference between 22 and 36 cm.
Place the cuff
blood flow of the arm should not be constricted by
clothing which is too tight, etc.
The cuff
1
a way that the lower edge lies 2–3 cm over the crook
of the arm and the artery. The cuff tubing
the centre of the palm.
Place the free end of the cuff
tightly, around the arm and close the Velcro strip. The
cuff should not be too tight (Fig. E). Check that two
1
fingers can still fit beneath the cuff
Now insert the cuff tubing
the connector (Fig. G).

adopting the correct posture

note: Stay still during the measurement process and do not
talk to prevent the measurement result from being falsified.
60 GB/IE
on a bare upper left arm (Fig. D). The
1
should be placed on the upper arm in such
closely, but not too
1
(Fig. F).
1
with the cuff plug
2
points to
2
into
3