Mitsubishi Electric AE-200A Instruction Book page 17

4-1-3. Operating the units in a given group
In the [Air-conditioners] display of the Condition List screen, click one of the group icons to display its operation
settings screen, which shows the current operation conditions. Change the desired settings and click [OK] to
reflect the changes. Click [Cancel] to return to the previous screen without making any changes.
Note: To operate an HWHP (CAHV, CRHV) unit group, click the icon of the group on the HWHP display of the Condition List
screen.
Block name
ON/OFF
Operation mode
Set temperature
Air direction
Filter Sign Reset
Cancel
Click to return to the
previous screen without
making any changes.
Item
Air-conditioners/HWHP
ON/OFF
*1
Operation mode
Set temperature *1
*1
Air Direction
WT07140X02
Click [Air-conditioners] to display the operation conditions of air conditioning unit groups,
LOSSNAY unit groups, Air To Water (PWFY) unit groups, and general equipment groups,
and click [HWHP] to display the operation conditions of HWHP (CAHV, CRHV) unit groups.
Click [ON] or [OFF] to turn on or off the units in a given group.
Note: Switching this switch will turn on or off the LOSSNAY unit as well that is interlocked
with the operation of indoor units in the group. To turn on or off the LOSSNAY unit
only, use the "Interlocked LOSSNAY ON/OFF" switch.
Click the desired operation mode.
Air conditioning unit: Cool, Dry, Fan, Heat, Auto, Setback
LOSSNAY unit: Heat Recovery, Bypass, Auto
Air To Water (PWFY) unit: Heating, Heating ECO, Hot Water, Anti-freeze, Cooling
HWHP (CAHV, CRHV) unit: Heating, Heating ECO, Hot Water, Anti-freeze
Note: Only the operation modes available for the unit model will appear.
Note: The Setback mode can be selected on the AE-200A/AE-50A/EW-50A, but not on the
AE-200E/AE-50E/EW-50E.
Click or to adjust the set temperature of the air conditioning unit or the Air To
Water (PWFY) unit.
Note: The settable temperature ranges depend on the unit model.
Note: If the indoor unit supports the dual set point function in the AUTO mode and when the
operation mode above is set to Auto or Setback, two set temperatures for Cool mode
and Heat mode can be set.
Note: When the indoor units that support the dual set point function and the indoor units
that do not support the dual set point function exist in the same group, only one set
temperature can be set in the AUTO mode.
Note: The temperature range restrictions settings on the Set Temperature Range Limit
settings screen on the Web Browser for Initial Settings will be effective on this screen.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings screen,
accessible via the Web Browser for Initial Settings.
Click or to adjust the air direction.
(Mid 3) (Mid 2) (Mid 1)
Note: Available air directions depend on the unit model.
17
Group name
"Centrally Controlled"
mark
Air-conditioners/HWHP
Interlocked LOSSNAY
ON/OFF
Fan speed
Fan speed of interlocked
LOSSNAY
OK
Click to reflect the changes
made.
Description
(Mid 0) (Horizontal) (Swing) (Auto)