Mitsubishi Electric AE-200A Instruction Book page 14

Item
Room humidity
Group icons
WT07140X02
The reading of the humidity sensor on the ME remote controller (North America: PAR-U01MEDU,
Europe: PAR-U02MEDA) will appear.
Note: If an ME remote controller (North America: PAR-U01MEDU, Europe: PAR-U02MEDA) is
connected to the group and the built-in humidity sensor is enabled, the reading of the sensor
will appear.
Each group icon indicates the operation condition of the group. Move the cursor to the icon to
display its group name. Clicking the icon will bring up the operation screen.
The icons to indicate the operation conditions are shown below.
(1) Air conditioning unit group
ON
Interlocked
*1*5
LOSSNAY ON LOSSNAY OFF
Energy-saving ON
*6*7*8
Bright/Dark
(Yellow) (Gray)
available. Icons can be selected on the group settings screen, accessible via the Web Browser
for Initial Settings.
*1 If the LOSSNAY unit is interlocked with the operation of Mr. Slim units, "Interlocked LOSSNAY ON"
icon will appear, even when the LOSSNAY unit is operated individually.
(Applicable M-NET adapter model: PAC-SF48/50/60/70/80/81MA-E)
*2 If a LOSSNAY unit is interlocked with the operation of indoor units in multiple groups, the LOSSNAY
unit may be in operation, even when the "Interlocked LOSSNAY OFF" icon is displayed.
*3 The Occupancy/Vacancy status icon will appear only when [Show occupancy icon], [Show vacancy
icon], or [Show both icons] is selected in the [Occupancy sensor display] section under the [Display
Format] section of the Basic System settings screen, accessible via the Web Browser for Initial
Settings.
*4 The Occupancy/Vacancy status icon will not appear if the remote controller in the group does not have
an occupancy sensor.
*5 The Occupancy/Vacancy status icon takes priority over the "Interlocked LOSSNAY ON" or "Interlocked
LOSSNAY OFF" icon.
*6 The Brightness/Darkness status icon will appear only when [Show bright symbol], [Show dark symbol],
or [Show both symbols] is selected in the [Brightness sensor display] section under the [Display
Format] section of the Basic System settings screen, accessible via the Web Browser for Initial
Settings.
*7 The Brightness/Darkness status icon will not appear if the remote controller in the group does not have
a brightness sensor.
*8 The "Setback ON" icon takes priority over the Brightness/Darkness status icon.
*9 The "Starting up" icon will stay when the unit cannot be recognized after startup. Check for proper
connection of the air conditioning unit and proper group settings.
*10 The Hold function can be used on the AE-200A/AE-50A/EW-50A, but not on the AE-200E/AE-50E/
EW-50E.
Description
OFF Error
Interlocked
Schedule set
*2*5
Setback ON Starting up
*10
HOLD ON
14
Filter sign ON
Schedule disabled
Occupied/Vacant
*9
*3*4*5
(Blue) (Gray)