Saxby Lighting 51994 Instruction Leaflet

Marquez outdoor recessed kit

Download this manual

Recycling advice

Waste electrical products should not be disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or retailer for recycling advice.

Safety information

• Live Voltages may be present in the transformer even

when turned off or when completely disconnected.

• For your safety, always switch off the supply before

maintaining the system.

www.saxbylighting.com

• This system contains non-replaceable parts and

cannot be serviced. If damage occurs the part should

be scrapped.

Iss.1 08012014

Saxby Lighting Ltd. BH23 3PE

Instruction leaflet

Marquez Outdoor Recessed Kit

51994

Need help?

Do you have a question about the 51994 and is the answer not in the manual?

Page 1 Recycling advice Instruction leaflet Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Marquez Outdoor Recessed Kit Safety information 51994 • Live Voltages may be present in the transformer even • This system contains non-replaceable parts and when turned off or when completely disconnected. cannot be serviced. If damage occurs the part should • For your safety, always switch off the supply before be scrapped. maintaining the system. Iss.1 08012014 www.saxbylighting.com Saxby Lighting Ltd. BH23 3PE...
Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. • Only use this product in conjunction with the • Drill a 30mm hole in the fixing surface, pass the In-line Transformer and Connector Box supplied. supply cable through and insert the Deck Light unit. Do not attempt to modify any component supplied. Bring the cable to the Connector Box and insert Warning firmly. Repeat this with the remaining units. • Firstly layout all the LED Lights units and cable in their desired location to ensure the Supply Cable • The Connector Box should be firmly fixed to a...