Key To Symbols; Symbols - Husqvarna 350BT Operator's Manual

Symbols

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Hearing protection
• Approved eye protection
This product is in accordance with
applicable EC directives.
Gloves should be worn when
necessary.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator
must ensure that no
people or animals come
closer than 15 metres.
When several operators
are working at the same site a safety distance of at least
15 metres must be in effect.
A breathing mask should be used
when there is a risk of dust.
Keep all parts of your body away
from hot surfaces.
2 – English

KEY TO SYMBOLS

Noise emission to the environment
according to the European
Community's Directive. The
machine's emission is specified in
the Technical data chapter and on
the label.
Other symbols/decals on the
machine refer to special certification requirements
for certain markets.
Switch off the engine by moving the stop
switch to the STOP position before
carrying out any checks or
maintenance.
Always wear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Choke lever in "open position".
Choke lever in "closed position".