Maintaining Your Vacuum; Emptying The Dust Cup - Shark Wandvac System WS630 Series Owner's Manual

MAINTAINING YOUR VACUUM

EMPTYING THE DUST CUP

1. With the power off, slide the release button
forward, and the dust cup will swing open. Tap
the filter screen lightly to knock off dust and debris.
NOTE: Do not wash any parts or accessories in a dishwasher.
s h a r kc l e a n . c o m
1
2. Wipe the screen inside the dust cup lightly with a
dry cloth to remove dust and dirt.
CLEANING THE DUST CUP AND FILTER
2
1. With the dust cup open and the power off, press
the filter release latch below the handle and pull
out the filter housing.
3. To deep clean the cup, first remove the Cyclone
Filter. Lift it out by the wire handle on the frame.
Rinse the dust cup with water, and wipe it clean
with a damp cloth. Allow it to air-dry for 24 hours.
MAINTAINING YOUR VACUUM
1
2. Press the tabs on both sides of the filter housing
and pull out the filter. To clean the filter, hand-
wash only with water and let air-dry for 24 hours
before reinstalling. To reinstall, slide it back into
the filter housing and press into place.
3
4. When the dust cup is completely dry, slide the
cyclone filter back into place. Tuck the wire handle
away, then reinstall the dust cup.
2
4
s h a r kc l e a n . c o m