Specifications; Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita TD111D Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Fastening capacities Machine screw
Standard bolt
High tensile bolt
No load speed Hard impact mode
Soft impact mode
Impacts per minute Hard impact mode
Soft impact mode
Rated voltage
Overall length
Battery cartridge
Net weight
without notice.
Intended use
and plastic.
Noise
Sound pressure level (L
Sound power level (L
WARNING:
Wear ear protection.
Vibration
mum capacity of the tool
Vibration emission (a
h
2
NOTE:
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
may also be used in a preliminary assessment of
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
to protect the operator that are based on an estima-
-
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
to this instruction manual.
-
-

SAFETY WARNINGS

2
General power tool safety warnings
all instructions. Failure to follow the warnings and
Save all warnings and instruc-
tions for future reference.
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4 ENGLISH
TD111D
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
-1
0 - 3,000 min
-1
0 - 1,300 min
-1
0 - 3,900 min
-1
0 - 1,600 min
D.C. 10.8 V
135 mm
BL1015, BL1020B
0.97 kg
WARNING:
WARNING:
Be sure to identify safety measures
WARNING:
Read all safety warnings and
BL1040B
1.1 kg