Advertisement
Stand-by function
To activate the Stand-by function, press button A for 3 seconds and the appliance will switch off.
To switch it back on, press button A again.
AlARm SigNAl
Temperature alarm
Note:
The temperature alarm may activate if the door is left open for a prolonged period of time
or following the introduction of fresh food in the freezer compartment; this temporary rise in
temperature does not affect the storage of already frozen food in any way.
DEfROSTiNg
1. Press button A (the freezer on/off button) for 3 seconds.
2. Unplug the appliance or switch off at the main switch.
3. Pull out the defrost water drain.
4. Follow the instructions given in the instructions booklet.
5. Plug in the appliance once again.
6. Press button A, the /freezer on/off button.
Follow the steps detailed in "Switching on the appliance".
DE
Signal
Led B lights up
gB
FR
NL
ES
PT
Cause
The internal
temperature is
above -12°C
IT
GR
SE
N
DK
Solution
Keep the door closed
until the alarm deacti-
vates.
FI
Advertisement
